The B+ Magic Mushrooms Grow Kit GetMagic GetMagic is distinguished by its huge, thick fruiting bodies and strong potency. Cultivators prefer it for its dependability and simplicity of development, making it a popular choice for both novice and professional mushroom growers.
Please learn more about: storage, directions, dos and don’ts, picking and harvesting, and soaking. This will assist you in growing successfully and producing vast quantities of powerful mushrooms.
| What’s in the box? | You need |
| 1x substrate container with 1200 cc / ml mycelium, perlite and vermiculite1x grow bag with air filterPaperclip(s) | Misting Bottle – Misting is needed for the humidity levelPotable water – For misting and soaking, warm water for soakingClean environment – Work clean to give other fungi and bacteria (micro organisms) no chance to contaminate. |
We recommend using
- Surgical gloves
- Facemask
- Disinfectant for hands
- Disinfectant for surfaces
- Soaking Bag
- Thermometer
- Thermo mat (when room temperature drops below 18°C)
How do I store B+ Magic Mushrooms Grow Kit GetMagic?
Do not store your grow kit longer than 2-3 weeks
We recommend that you begin growing your mushroom grow kit immediately away. If you wish to grow later, do not keep your grow kit for more than 2-3 weeks after it was manufactured.
Store in a cool place
Always keep the mushroom growing kit in the fridge (2°C to 4°C). The manufacture date and the two digits of the week number are printed on the cardboard box.
Avoid contamination
Make sure your refrigerator is clean and clear of bacteria, yeasts, and other contaminants. To be safe, place the culture kit in a clean plastic bag and carefully seal it.
Instructions
- 1
Wash your hands thoroughly and clean the outside of the growkit with a dry cloth. Remove the lid and save it for step 2 - 2
Fill the growkit to the edge with lukewarm water (20°C), put the lid back on the growkit and let it soak for 5 minutes.Important: never soak the growkit for more than 1 hour! - 3
Remove the lid from the growkit and drain the water well. Let the growkit drain for 10 seconds. - 4
Place the growkit in the growbag and fill the growbag with a cup (200-250ml) of lukewarm water (20°C). Then fold the top of the bag and close it with 2 paperclips. - 5
Place the growkit in a place with 20-25°C average room temperature. Make sure that the growkit is not in direct sunlight, not under a lamp and not near a radiator/heat source.
Important: the bag must remain closed until the first pinheads form. Until then the CO2 content and humidity inside the bag should be as high as possible. - 6
When the first pinheads* are visible, let some fresh air into the growbag on a daily basis (for a few minutes) and then moisten the growkit with a misting bottle.
*Pinheads are the first visible forms of tiny mushroom caps. It can take 10 to 20 days for the first pinheads to be visible. - 7
The mushrooms can be harvested just before the membranes on the bottom of the cap open up. While harvesting gently grasp the stem and turn it left/right. When the mushroom becomes loose, pull it out as carefully as possible.
Important: the mushroom must be completely removed so that there is room for a new one. - 8
Congratulations, the harvest is complete. It is now possible to grow a new flush of mushrooms by repeating steps 1 to 7 again.
Read the following do’s and dont’s for a successful grow.
Despite the fact that mushroom grow kits are simple to use and relatively foolproof, we have summarized the most significant elements for you. Temperature, light, humidity, the first mushrooms, and the growth cycle are only a few examples.
Temperature
The optimal temperature for mushroom development is 24°C. The temperature should not go below 20°C and should not rise above 29°C. You can use a Thermo Heatingmat to keep the temperature from going below 20°C. In the winter or colder places of the world, a thermo mat is a must-have.
Light
The mycelium in the magic mushroom kit only requires light to ‘understand’ that it has reached the surface. Only then will mushrooms sprout. A few hours of fluorescent/artificial light or indirect sunshine per day is sufficient. Because direct sunlight destroys mycelium, keep the sun away from the grow kit.
Humidity
Misting begins the day the first pins appear. Remove the paperclip from the grow bag to open it. Spray once against each side of the bag rather than immediately on the cake. So you mist four times a day. Misting also allows fresh oxygen to enter the bag. Close the bag with the paperclip immediately after misting.
Frequent air exchange (FAE)
Keep the grow bag tight until the first pins appear; CO2 levels should be as high as possible to stimulate pinning. After the pinning step, you can open the bag 1-2 times per day to allow fresh air to enter. Open and seal the bag, pushing out the air and letting in some fresh air.
The 1st shrooms!
If the growing circumstances are ideal, the first little mushrooms (the pins) should develop between 10 and 20 days. This is also determined by the strain. Some cubensis strains mature at a slower rate than others. It may take another week to reach maturity. A whole growth cycle can last up to 4-5 weeks.
Flushes
The mushrooms appear in clusters. A flush is a type of growth like this. A kit can provide more than one flush. The first two flushes are the most significant. More flushes will follow, each one smaller than the last.
Reviews
There are no reviews yet.